The steel wire braided hose is made of special synthetic rubber, which has good heat resistance and aging resistance. The components of the rubber hose include an inner and outer rubber layer and a steel wire layer. In these components, the outer rubber layer plays a role in bearing the pressure during the medium transportation process, the outer rubber layer is used to prevent external damage, and the steel wire layer plays a reinforcing role. Below is a brief explanation of what issues to pay attention to when purchasing a high-pressure hose assembly.

1. According to the actual working conditions of the equipment and the selection of the appropriate high-pressure rubber hose assembly through the medium, the rubber hose assembly has its specific working range. Under appropriate temperature and pressure, the service life of the steel wire braided rubber hose will be longer. When the operating environment temporarily exceeds the temperature or pressure of the assembly, the assembly is prone to aging. If not replaced in a timely manner, accidents may occur. In addition, special attention should be paid to the transmission medium, and the rubber material of the components should be compatible with the medium.

2. Choosing the appropriate pressure range: Most customers will not make mistakes on this issue, but it is still important to remind everyone to choose a high-pressure hose with slightly higher pressure, as the operating environment is usually harsh. If a suitable pressure assembly is chosen, the assembly will temporarily be at full load, which will affect its service life.

3. Choosing the appropriate inner diameter of the high-pressure hose assembly: This issue is easily overlooked by customers, but it is one of the factors that needs to be considered. If the flow rate is too fast with too little content, it will definitely reduce work efficiency and cause the system to heat up. However, when the inner diameter is too large, it will increase intangible costs, so special requirements need to be made for the inner diameter of the high-pressure hose assembly.

The above are the precautions for selecting a high-pressure hose assembly. During use, the steel wire braided hose should be slowly and evenly adjusted for pressure to prevent sudden increase in pressure and damage to the hose body.